Resource Time Comparison

Table B: Considers all models.

Date / Time: 09/27/02 10:16:16

Total resource time for all models.

See the solver return definitions for optimal/feasible model and solve statuses. Solutions are not checked for how close they are to eachother. Resource times are considered the same, if they are within 10% of eachother. A solver is considered faster than another, if it is less than 50% faster than the other. A solver is considered much faster than another, if it is more than 50% faster than the other.

If a model was not solved optimal/feasible by both solvers, the resource time is considered the same. If a model was solved optimal/feasible by solver A but not by solver B, then solver A is considered infinitely faster than solver B.

A solver is considered to have a better objective function value, if the relative objective value difference is greater than 1.00E-05.

Tracefile 1 :	`b0`
Tracefile 2 :	`b2`
Solvers used :	`BARON default`
	`BARON op2`
Modeltype(s)	NLP

	Total	Obj BARON default better	Obj same	Obj BARON op2 better
Solver BARON defaultinfinitely faster :	`1`	`1`	-	-
Solver BARON default much faster :	-	-	-	-
Solver BARON default faster :	-	-	-	-
Solvers perform the same :	`2`	`1`	-	`1`
Solver BARON op2 faster :	`23`	-	`23`	-
Solver BARON op2 much faster :	`21`	-	`21`	-
Solver BARON op2 infinitely faster :	-	-	-	-
Both solvers failed to solve optimally :	`3`	-	`3`	-
Total models: :	`50`	`2`	`47`	`1`

Solver return definition:

Outcome	Model Status	Solver Status
optimal	1 or 15	1
feasible	2 or 8 or 16	1 or 2 or 3 or 4 or 5

Resource Times:

Models for each resource time category. Listed are the solver resource times in seconds, as well as the ratio of resource times for the two solvers if both solved optimally. Models not solved optimally by a solver have status listed instead of resource time.
Also listed are the objective values using both solvers. The better solution found is listed in boldface. A solution is considered better, if the relative objective function difference is greater than 1.00E-05.
Solver resource time ratios for a particular model are listed only if both solvers are optimal and if one solver has resource time greater than 5.00E-02.

Solver BARON default infinitely faster - Obj of BARON default better: Back to top

Modelname	BARON default	BARON op2	Ratio (BARON default / BARON op2)	Obj BARON default	Obj BARON op2
`48lmp1`	`305.6100`	`f`	--	`2.92426734E+08`	1.58284000E+08

Solvers perform the same: Back to top

Modelname	BARON default	BARON op2	Ratio (BARON default / BARON op2)	Obj BARON default	Obj BARON op2
`46lmp1`	`302.1800`	`300.0000`	`1.007`	`4.95079504E+07`	`4.95791123E+07`

Solvers perform the same: Back to top

Modelname	BARON default	BARON op2	Ratio (BARON default / BARON op2)	Obj BARON default	Obj BARON op2
`41lmp1`	`300.4100`	`289.4500`	`1.038`	`5.09388315E+06`	`3.03790810E+06`

Solver BARON op2 faster - Obj same for both solvers: Back to top

Modelname	BARON default	BARON op2	Ratio (BARON default / BARON op2)	Obj BARON default	Obj BARON op2
`1lmp1`	`0.3700`	`0.2200`	`1.682`	`1.34304169E+03`	`1.34304169E+03`
`2lmp1`	`0.4000`	`0.2400`	`1.667`	`2.86133253E+02`	`2.86133253E+02`
`3lmp1`	`0.3800`	`0.2400`	`1.583`	`2.16242852E+03`	`2.16242852E+03`
`4lmp1`	`0.3400`	`0.2400`	`1.417`	`7.57851017E+02`	`7.57851017E+02`
`5lmp1`	`0.3300`	`0.2500`	`1.320`	`3.13486788E+02`	`3.13486788E+02`
`9lmp1`	`6.8200`	`4.3700`	`1.561`	`5.50561099E+02`	`5.50561099E+02`
`16lmp1`	`0.5700`	`0.3500`	`1.629`	`3.40514987E+04`	`3.40514987E+04`
`17lmp1`	`0.5500`	`0.3400`	`1.618`	`9.51781638E+03`	`9.51781638E+03`
`18lmp1`	`0.6200`	`0.5100`	`1.216`	`8.10242185E+04`	`8.10242185E+04`
`19lmp1`	`0.7200`	`0.4600`	`1.565`	`1.26297615E+05`	`1.26297615E+05`
`20lmp1`	`0.6400`	`0.4600`	`1.391`	`5.88440007E+04`	`5.88440007E+04`
`31lmp1`	`0.9300`	`0.6200`	`1.500`	`7.48596357E+05`	`7.48596357E+05`
`32lmp1`	`1.3600`	`0.8400`	`1.619`	`1.27643488E+06`	`1.27643488E+06`
`33lmp1`	`1.1100`	`0.7300`	`1.521`	`2.08839366E+06`	`2.08839366E+06`
`34lmp1`	`0.8200`	`0.6800`	`1.206`	`3.66054669E+05`	`3.66054669E+05`
`35lmp1`	`1.2100`	`0.8200`	`1.476`	`1.40548992E+06`	`1.40548992E+06`
`36lmp1`	`16.4500`	`14.3800`	`1.144`	`8.25385867E+05`	`8.25385867E+05`
`37lmp1`	`60.6700`	`30.7000`	`1.976`	`2.68946093E+06`	`2.68946093E+06`
`40lmp1`	`54.3700`	`31.5200`	`1.725`	`1.41080802E+06`	`1.41080802E+06`
`42lmp1`	`308.5600`	`170.6300`	`1.808`	`1.53785250E+06`	`1.53785250E+06`
`43lmp1`	`300.1200`	`201.9600`	`1.486`	`1.78712388E+06`	`1.78712388E+06`
`44lmp1`	`300.1000`	`179.1000`	`1.676`	`2.24481601E+06`	`2.24481601E+06`
`45lmp1`	`300.1200`	`185.8600`	`1.615`	`1.42446397E+06`	`1.42446397E+06`

Solver BARON op2 much faster - Obj same for both solvers: Back to top

Modelname	BARON default	BARON op2	Ratio (BARON default / BARON op2)	Obj BARON default	Obj BARON op2
`6lmp1`	`13.3500`	`4.3600`	`3.062`	`1.11656595E+03`	`1.11656595E+03`
`7lmp1`	`9.2100`	`4.4700`	`2.060`	`4.18056606E+02`	`4.18056606E+02`
`8lmp1`	`15.9900`	`4.4200`	`3.618`	`5.68868471E+02`	`5.68868471E+02`
`10lmp1`	`7.7500`	`3.5800`	`2.165`	`6.05364770E+02`	`6.05364770E+02`
`11lmp1`	`114.9600`	`22.3100`	`5.153`	`9.77993714E+01`	`9.77993714E+01`
`12lmp1`	`63.3900`	`20.5200`	`3.089`	`7.85704043E+01`	`7.85704043E+01`
`13lmp1`	`118.6900`	`19.7400`	`6.013`	`1.99147927E+02`	`1.99147927E+02`
`14lmp1`	`109.4100`	`22.2300`	`4.922`	`2.12656000E+02`	`2.12656000E+02`
`15lmp1`	`106.2400`	`21.8800`	`4.856`	`5.26163518E+02`	`5.26163518E+02`
`21lmp1`	`31.6400`	`8.9000`	`3.555`	`3.34358628E+04`	`3.34358628E+04`
`22lmp1`	`23.4300`	`9.5000`	`2.466`	`3.03827776E+04`	`3.03827776E+04`
`23lmp1`	`26.3400`	`12.3100`	`2.140`	`3.48488733E+04`	`3.48488733E+04`
`24lmp1`	`19.3700`	`9.5200`	`2.035`	`7.35610083E+03`	`7.35610083E+03`
`25lmp1`	`40.7400`	`12.5200`	`3.254`	`6.43318161E+04`	`6.43318161E+04`
`26lmp1`	`228.5500`	`31.8800`	`7.169`	`3.67386977E+04`	`3.67386977E+04`
`27lmp1`	`212.9900`	`28.5900`	`7.450`	`1.08604363E+04`	`1.08604363E+04`
`28lmp1`	`136.3200`	`36.6800`	`3.716`	`2.51993500E+04`	`2.51993500E+04`
`29lmp1`	`112.3600`	`40.1000`	`2.802`	`3.96776580E+04`	`3.96776580E+04`
`30lmp1`	`150.2300`	`37.5300`	`4.003`	`3.89254150E+04`	`3.89254150E+04`
`38lmp1`	`94.6000`	`45.9600`	`2.058`	`4.48850391E+06`	`4.48850391E+06`
`39lmp1`	`29.0600`	`13.4100`	`2.167`	`2.80253970E+05`	`2.80253970E+05`

Both solvers failed to solve optimally - Obj same for both solvers: Back to top

Modelname	BARON default	BARON op2	Ratio (BARON default / BARON op2)	Obj BARON default	Obj BARON op2
`47lmp1`	`f`	`f`	--	`1.49561000E+08`	`1.43841000E+08`
`49lmp1`	`f`	`f`	--	`2.90572000E+08`	`2.92244000E+08`
`50lmp1`	`f`	`f`	--	`2.51417000E+08`	`2.48073000E+08`